The Rexroth MHD093C-035-NG0-BA supplied by Mao Hui Machinery from China adopts a 093 base with an extended core structure, featuring strong power performance. It has a rated continuous torque of 23 Nm, a peak torque of 88 Nm, and a maximum rotational speed of up to 6000 rpm.
The constant torque output is stable, capable of meeting the combined conditions of low-speed heavy-load cutting and medium-high-speed precise feed.
Suitable for 380V industrial three-phase power supply, can be accurately matched with the mainstream Rexlok servo driver, three-loop closed-loop control is stable, dynamic response and excellent operating accuracy. The equipment is equipped with HSF incremental encoder, supporting automatic parameter storage, is easy to debug, has strong anti-interference ability, and ensures high-precision positioning and trajectory following.
The entire machine has IP65 protection, uses a shaft without flat key and an integrated sealing structure, is suitable for harsh conditions such as dust, oil mist, and cutting fluid.
There is no built-in brake design, the machine body is simple, has a small inertia, and has a quick start-stop response; the B-side wiring layout is neat, and it can effectively avoid equipment movement interference.
| Continuous rated torque | 23Nm |
| Flange size | 140/150 mm |
| Rated speed | 6000 rpm |
| Centering diameter | 130mm |
| Cooling method | Natural convection |
| Brake | No built-in brake |
| Protection class | IP65 |
| Weight | 14.51kg |
The Rexroth MHD093C-035-NG0-BA motor adopts a natural air-cooling fanless structure, featuring no maintenance requirements and no dust accumulation faults. It is suitable for long-term continuous production. It is equipped with a high-strength cast aluminum body, F-class insulated windings, and long-lasting lubrication bearings, offering advantages such as low torque pulsation, low noise, shock resistance, high temperature resistance, and stable operation. It is compatible with various equipment for horizontal feed continuous operation positions, and is known for its high rigidity, high precision, and high reliability, making it an excellent servo power solution for medium and heavy-load automation equipment.
The Rexroth MHD093C-035-NG0-BA is specifically designed for medium and heavy loads, high precision, and 24-hour continuous automatic production scenarios. It is widely applicable in industrial settings such as CNC machines, packaging and printing, plastic and rubber processing, and intelligent conveying.
The Rexroth MHD093C-035-NG0-BA is all brand-new, original, and in stock. It supports bulk purchasing with a large inventory of ready-to-use supplies. In case of shortage, the delivery cycle for orders is 15-30 working days. The price for bulk orders can be negotiated. It supports standard spare parts including power plugs, encoder-specific cables, brake control relays, shaft end oil seals, and replacement bearings. It can provide a complete set of drive components in one package. You can make your purchase through us.
The original design is compatible with all mainstream servo drives from Yaskawa such as DDS, DKE, and HDS. The encoder comes with a built-in motor parameter storage chip, and it can automatically identify and match the parameters upon power-on. There is no need for manual entry of parameters, making the debugging convenient and error-prone.
The B-side outlet is the standard lateral outlet for the motor, which can avoid interference from the equipment's moving mechanism and has neat wiring. During installation, it is necessary to reserve some slack for the cables to avoid pulling the cables during high-speed reciprocating motion, reducing cable wear and breakage.
The overall design is maintenance-free, with an extremely low failure rate. Common problems mainly occur after long-term use, such as slight leakage of the shaft seal, deviation of the encoder signal, and aging of the cables. Daily maintenance only requires keeping the machine body clean and avoiding high temperatures and overloading; the maintenance priorities are replacing the shaft seal, calibrating the encoder zero point, and inspecting the winding insulation.
To ensure the safety of Rexroth MHD093C-035-NG0-BA servo motors during long-term transportation, we strictly comply with IOS standards. From product outbound inspection, internal protection, external packaging to logistics delivery, every link is strictly confirmed to reduce risks such as collision, moisture and vibration during transportation. Ensure that customers can quickly install and use the equipment after receiving the products.
Confirm the product model and specification information according to the purchase order to avoid affecting equipment matching due to model differences.
Inspect the housing, connection interfaces, shaft ends and nameplate information of the servo motor to confirm that the product appearance is intact and there is no damage before transportation.
Inspect the basic condition of the product to ensure that it meets the delivery requirements.
Check supporting documents and related attachments according to order requirements to ensure the completeness of delivery data.
China Mawei Machinery has in-stock servo motors of other MHD models from Yaskawa. Welcome to contact us for inquiries and purchases.
MHD071A-061-NG0-UN
MHD071B-061-PP1-UN
MHD093A-035-PP0-BA
MHD093A-058-NG0-AA
MHD093B-024-PG2-BA
MHD093C-058-NG0-AA
Address
No. 16, North Square Road, Gaobei Town, Dongguan City, Guangdong Province, China
Tel
