Products

Products

B&R 8MSA4X.R0-30
  • B&R 8MSA4X.R0-30B&R 8MSA4X.R0-30
  • B&R 8MSA4X.R0-30B&R 8MSA4X.R0-30
  • B&R 8MSA4X.R0-30B&R 8MSA4X.R0-30
  • B&R 8MSA4X.R0-30B&R 8MSA4X.R0-30

B&R 8MSA4X.R0-30

The B&R 8MSA4X.R0-30 is the longest and most powerful three-phase permanent magnet synchronous servo motor in the 8MS series of B&R. Its no-load torque is as high as 9.5 Nm, and the peak torque is 38 Nm. It is widely used in high-end intelligent manufacturing fields such as CNC equipment, automated production lines, industrial robots, and precision equipment for new energy. You can purchase it through China Maohui.

    The B&R 8MSA4X.R0-30 offers a sustained locked-rotor torque of up to 9.5 Nm and an instantaneous peak torque of 38.0 Nm on a compact installation cross-section. It is specifically designed to perform high-dynamic, heavy-load closed-loop motion control in conjunction with B&R ACOPOS series servo drives and supports wide temperature range operation. It has excellent dust-proof, oil-resistant and electromagnetic interference-resistant capabilities, and can easily cope with the complex and harsh production conditions in industrial workshops.


    B&R 8MSA4X.R0-30B&R 8MSA4X.R0-30
    B&R 8MSA4X.R0-30B&R 8MSA4X.R0-30


    Key Technical Parameters

    Parameter Item Technical Specification
    Installation Flange Size 102 × 102 mm (B5 flange installation, locating stop Ø95 j6, screw hole pitch circle Ø115 mm)
    Total Length of the Body (excluding brake, PP) 285.5 mm
    Standard Output Shaft Size Ø19 k6 × 40 mm, shaft end internal thread M6 (with enhanced bearings: Ø24 k6 × 50 mm, M8 thread)
    Feedback Device 2-pole resolver
    Stall Torque (M0M0) / Peak Torque (MmaxMmax) 9.5 Nm / 38.0 Nm
    Rated Speed (nNnN) / Maximum Speed (nmaxnmax) 3000 rpm (4500 rpm for some customized winding batches) / 12,000 rpm
    Rated Power (PNPN) / Rated Torque (MNMN) 2.67 kW / 8.5 Nm (based on 3000 rpm)
    Rated Current (ININ) / Stall Current (I0I0) 6.0 A / 6.38 A (instantaneous peak current ImaxImax: 38.3 A)

    Mechanical structure and installation dimension details

    The B&R 8MSA4X.R0-30 supports horizontal installation (IM3001) as well as vertical installation with the shaft extension downward (IM3011) or upward (IM3031).

    The front cover has a square flange profile: 102 × 102 mm; the main body of the enclosure has a square cross-section: 97 × 97 mm.

    The precision machined locating key diameter: Ø95 j6, the height of the key shoulder is 3.5 mm.

    Standard bearing configuration: Shaft diameter Ø19 k6, effective shaft extension length 40 mm, shaft end face center with M6 internal thread hole.

    Enhanced heavy-duty bearing configuration: Shaft diameter enlarged to Ø24 k6, effective shaft extension length 50 mm, shaft end face with M8 internal thread hole.

    Keyway form: Two options are provided: smooth shaft (Smooth shaft) and keyed shaft with DIN 6885-1 flat keyway (Keyed shaft).


    Typical application

    Metal processing and machine tool auxiliary shafts:

     CNC machine tool feed axes, tool magazine indexing positioning and feeding mechanisms

    Packaging and printing machinery:

     Large film cutting units, main traction rollers and high-speed synchronous shearing shafts

    Plastic and rubber molding equipment:

     Injection molding machine auxiliary ejection, picking-up mechanical hands and extrusion traction drive

    Heavy-duty material handling and assembly lines: 

    Gantry truss transfer shafts, lifting positioning platforms and large-load sorting devices


    Fixed direction of outlet structure

    Unlike the models with manually rotatable plugs in the later part, the orientation of the B&R 8MSA4X.R0-30 double circular metal aviation socket is fixed by the rear cover locating pins during the factory assembly. During on-site installation, the socket cannot be forcibly rotated; otherwise, it will break the internal rotary transformer and power lead wires.

    Plug vibration resistance and protection structure:

    Both the power and rotary transformer sockets adopt threaded metal locking rings and built-in fluorine rubber O-ring seals. After the original 8CM series shielded cable plug is tightened, the interface also meets the IP64/IP65 protection and high acceleration vibration resistance requirements.


    FAQ:

    Can the B&R 8MSA4X.R0-30 be directly used to replace the original 8MSA4S small drive?

    No, it cannot be directly used. The current capacity of the drive must be checked.

    The orientation of the aviation socket is inconsistent with the wiring direction on site. Can the socket be manually rotated?

    Forbidden to forcibly rotate the socket. The double circular aviation sockets of the early 8MSA series were mechanically fixed by the rear cover at the factory. Forcefully twisting the socket with tools will directly break the internal stator leads or the rotary change signal lines, resulting in the motor being scrapped.

    How to ensure that the rated stall torque of 9.5 Nm is achieved without overheating?

    Most of the heat needs to be conducted through the front-mounted mounting flange to the metal mounting plate of the equipment for dissipation.



    Send Inquiry
    Contact Info
    Send an inquiry to Mao Hui for brand new, original and genuine schneider servo, B&R servo, rexroth servo and other automation parts. Check availability and request a quotation for in-stock or bulk orders.
    X
    We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy
    RejectAccept