The Chinese supplier, Maohui Machinery, supplies the B&R 8MSA4S.R0-668MSA4S.R0-66, which is specifically designed for ultra-high rotational speed, extremely fast response, high-frequency reciprocation, and micrometer-level precise positioning scenarios. The rated rotation speed is 6000 rpm and the rated torque is 1.8 Nm, compatible with industrial voltages ranging from 400V to 480V.
The B&R 8MSA4S.R0-66 features extremely low rotational inertia, ultra-high rotational speed, extremely fast dynamic response, and extremely high repetitive positioning accuracy. It differs from conventional low-speed servo motors and can achieve millisecond-level start and stop, as well as high-frequency continuous reciprocating motion, perfectly adapting to high-speed precision automation equipment. Maohui Machinery has in stock and welcomes your purchase.
Key Technical Parameters
Parameter Item
Technical Specification
Stall Torque (M0M0)
2.6 Nm
Peak Instantaneous Torque (MmaxMmax)
10.4 Nm (4× overload capacity)
Rotational Inertia of the Rotor (excluding brake, JJ)
1.9 kg·cm²
Maximum Angular Acceleration (excluding brake, αα)
54,737 rad/s²
Thermal Time Constant (tthermttherm)
60 min
Recommended Power Cable Cross-Sectional Area
1.5 mm²
Electrical interface and thermal protection details
Power and brake socket: The B&R 8MSA4S.R0-66 adopts a circular metal industrial aviation socket, integrating three-phase power lines (U/V/W), protective grounding (PE), and optional 24 VDC brake power lines (Brake+ / Brake-).
Resolver and temperature feedback socket: Independent circular metal aviation socket, transmitting resolver excitation signals (Ref+ / Ref-), sine and cosine feedback signals (Sin+ / Sin-, Cos+ / Cos-), and signals from the built-in temperature sensor of the winding.
Double protection of winding overheating: the PTC/KTY temperature sensor is embedded inside the stator winding, and the signal is directly sent to the ACOPOS driver through the feedback cable for real-time monitoring. With the I²t thermal model algorithm inside the driver, the winding burn caused by high current blocking can be prevented.
Exterior protection and sealing grade
The B&R 8MSA4S.R0-66 is completely dustproof and resistant to water splashing from any direction.
If there is cutting fluid splashing or grease penetration from the reducer in the working environment, it is necessary to confirm that the shaft end has been equipped with a DIN 3760 Form A fluorine rubber radial skeleton oil seal. In this case, the overall protection grade of the machine is raised to IP65.
Typical application fields
Packaging and filling machinery:
pillow packaging machine, labeling machine, film cutting and sealing positioning unit
Printing and textile machinery:
Tension control roller, color marking tracking and reciprocating guide yarn mechanism
Material handling and assembly line:
small truss manipulator, sorting push rod and precision conveyor drive
Plastic and rubber processing equipment:
Auxiliary feeding shaft and mold positioning adjustment shaft
Selection and Maintenance
The B&R 8MSA series has entered the end-of-life spare parts stage. We have a small stock of these parts and can use them as a replacement platform for the new generation of 8LSA43/8LSA44 series. When replacing spare parts on-site, check the rated speed (nN) on the white nameplate on the motor side, whether a 24V brake is equipped, the form of the shaft extension key slot, and the orientation of the aviation plug outgoing line.
FAQ
How to distinguish whether the output shaft is Ø19 mm or Ø24 mm? And is it with key slots?
Standard configuration: The default output shaft diameter of 8MSA4S is Ø19 k6, with an extension length of 40 mm, and the shaft end has an M6 center thread hole.
Enhanced bearing configuration: Includes an enhanced radial heavy-duty bearing on the A side. The output shaft diameter will be increased to Ø24 k6, with an extension length of 50 mm, and the shaft end has an M8 center thread hole.
Key slot confirmation: Provides two versions - a plain shaft (without key slot) and a shaft with a DIN 6885-1 flat key slot. Before replacement, it is recommended to directly measure the shaft diameter of the old motor with a caliper and confirm whether the coupling has a key slot for matching.
Can the motor be used in environments where cutting fluid splashes or there is damp oil residue?
8MSA4S.R0-66 is suitable for conventional dry or slightly dusty industrial workshops. If there is gearbox lubricant leakage at the installation location or cooling liquid directly splashes onto the shaft extension end, it is necessary to confirm that the front cover of the motor has been equipped with a DIN 3760 Form A radial gland oil seal to prevent water columns from directly applying high-pressure flushing to the aviation plug interface.
Which B&R servo drives does the motor support?
Designed specifically for B&R ACOPOS series servo drives, it can be directly connected to the ACOPOS 8V1022.00-x or ACOPOS 8V1045.00-x drives equipped with a rotary transformer interface card. Using the rotary transformer feedback (R0) without an electronic label, when configuring axis parameters in Automation Studio, it is necessary to manually select the corresponding motor model and winding parameters.
Send an inquiry to Mao Hui for brand new, original and genuine schneider servo, B&R servo, rexroth servo and other automation parts. Check availability and request a quotation for in-stock or bulk orders.
We use cookies to offer you a better browsing experience, analyze site traffic and personalize content. By using this site, you agree to our use of cookies. Privacy Policy